Petrol Engine driven welder - Honda GX390 Engine - Three-phase asyncronous alternator - Three-phase generation 6 kVA - Single-phase generation 5 kVA - Max welding current: 200A

The TS-200 BS/CF is a professional machine, without electronics capable of delivering up to 200 A with a duty cycle of 60%.

The welding current is adjusted by changing the rpm of the engine. Equipped with an 11.1 HP HONDA GX-390 petrol engine and an asynchronous alternator, it can be used as a welder or as a three-phase and single-phase electrical generator up to 6 kVA.

The welding current is available on two scales, selectable by means of the connection to two different welding sockets. The TS-200 BS/CF is able to weld any kind of electrode (rutile, basic, cellulose) up to 4 mm in diameter.

An engine-driven welder suitable for a wide range of uses from maintenance to site welding fabrication.

In according with CE regulation

Aksesuarlar

• CTM200 Trolley

Technical Properties

ENGINE
Model	Honda GX 390
Fuel	Petrol
Starter	Recoil
Output	8.3 kW (11.3 HP)
Cylinders / Displacement	1 / 389 cm3
Speed	3000 rpm
Cooled	Air
WELDING
Current range, continuous	20 ÷ 100A 90 ÷ 190A
Duty cycle	190 A 35% 160 A 60% 120 A 100%
Open circuit voltage	98 V
GENERAL
Dry weight	111 kg
Dimensions	910x530x580 mm
Acoustic power LwA (pressure LpA):	98 dB(A) (73 dB(A) @ 7 m)

Product Brochure