Miller XMT® 450 CC/CV 450 A Multiprocess

Miller

XMT® 450 CC/CV

450 A Multiprocess

Portability and excellent arc performance make the XMT family the most popular in the industry. The XMT® 450 CC/CV is the most popular model for its flexibility and simplicity.
14-pin receptacle has the flexibility to be used with spool guns, feeders, and remote controls.
Optional 115-volt auxiliary power provides 10 amps of circuit-breakerprotected power for coolant systems, etc.
Optional Welding Intelligence™ system XMT CC/CV and MPa models are Insight-capable to monitor weld voltage, amperage, and arc-time and percentage.
High-quality performance in all welding processes.
Adaptive Hot Start™ makes starting stick electrodes easy without creating an inclusion.
Infinite arc control available in the stick and wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications.
Lift-Arc™ provides arc starting that minimizes contamination of the electrode and without the use of high-frequency.
Wind Tunnel Technology.™ Internal air flow that protects electrical components and PC boards from dirt, dust and debris… greatly improving reliability.
Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
Unique case design helps protect internal components from dirt and dust. To connect input power cord and/or set unit up for correct input power, remove the easy-to-handle panel (1/3 case). The remaining two-thirds of the case never needs to be removed!
Process selector switch reduces the number of control setup combi nations without reducing any features.
Large, dual digital meters are easy to view and are presettable to ease setting weld output.
Ultra-tough, polycarbonate-blended cover protects front controls from damage.
Primary voltage display shows what primary voltage the power source is linked for without removing the sidepanels. Saves time and assures you that the power source has been correctly linked for available input voltage.
Auto Remote Sense™ enables unit to automatically use remote control if connected to remote control receptacle.

welding machine, TIG welding, MIG mwelding, MMA, Miller Welding

Construction
Shipbuilding
Railroad
Truck/trailer manufacturing
Fabrication
Repair shops
Rental fleets
Power generation plants

Weldable Metals	Thin to thick, all materials, 0,8-1.6 mm solid, cored wires
Input Voltage	230/460 V, 400 V (CE) or 575 V
Input Phase	Requires 3-phase power
Input Hz	50 Hz
Amperage Range	15 – 600 A
Output Range	10–38 V, 15–425 A
Rated Output	450 A at 38 VDC, 100% duty cycle
Max Open Circuit Voltage	90 VDC
Weld Output	CC/CV
Net Width	368 mm (14.5 in.)
Net Height	438 mm (17.25 in.)
Net Length	689 mm (27.125 in.)
Net Weight	55.3 kg (122 lb.)

MIG (GMAW)/Pulsed MIG (GMAW-P)*
Stick (SMAW)
TIG (GTAW)
Flux-cored (FCAW)
Air carbon arc cutting and gouging (CAC-A)
Rated: 5/16-inch carbons
Capable: 3/8-inch carbons
*Available on select models.