Page 130 - millerwelds catalog_2022

A FLE24 Cat P 130 Accessories.qxp_Accessories 1/11/24 6:15 PM Page 1

ACCESSORIES

Wire Feeder Accessories Power Supply Adapter Spool Gun Controls and Kits
PSA-2 Control 141604 For more information on WC-115A and WC-24
Extension Cables (14-Pin)
Required when using SuitCase see literature M/1.73 or M/1.76.
8-Conductor Cables 12RC, 20 Series or 74 MPa WC-115A Weld Control
242208025 25 ft. (7.6 m) Plus feeders with power sources
137546 Without contactor
242208050 50 ft. (15 m) having only 115-volt power 137546011 With contactor
242208080 80 ft. (24.4 m) available. Control is equipped
Operates on 115-volt power
For SuitCase 12RC and 20 Series feeders. For 14-pin with a 14-pin receptacle and a and designed primarily for
remote controls and 24 VAC wire feeders. 14-pin plug to a 10-foot (3 m) inter connecting
constant-current DC power
14-pin socket. Not for 115-volt XR feeders. cord with Hubbell connections sources. Can also be used
for older-style power sources.
11-Conductor Cables with constant-voltage (CV)
Can also be used with competitive power sources requiring
247831025 25 ft. (7.6 m) power sources or DC engine
247831050 50 ft. (15 m) a contact closure for contactor control. drives supplying 115 volts. Used with a constant-current (CC)
247831080 80 ft. (24.4 m) PSA-2 Extension Cord 047813 source the control circuit functions in a voltage-sensing
For XR-AlumaFeed SuitCase and 74 MPa Plus feeders. 25-foot (7.6 m) cord extends 10-foot (3 m) cord supplied mode, and with a CV source it functions as a constant-speed
Eleven conductors to support contactor control and remote with PSA-2 control (4-pin to 4-pin connection). circuit. Includes wire run-in and drive motor acceleration
voltage control on all Miller®electronic constant-voltage (CV) controls which ensure optimum arc starting performance.
14-pin power sources. Additional functions supported when Spool Adapter WC-24 Weld Control
using the AlumaPower MPa or XMT MPa power sources 137549
include synergic pulsed MIG, remote process select and 047141 For Spoolmate 200,
side select capabilities. For use with 14-pound (6.4 kg) spool of Hobart or Lincoln Spoolmatic and Spoolmatic
self-shielding wire.
14-Conductor Cables Pro. Easily mounts on power
242205025 25 ft. (7.6 m) source. Designed for use
242205050 50 ft. (15 m) with Miller® constant-voltage
For HDC and WC-115 weld controls. Fully-loaded 14-pin (CV) power sources with
extension cables for remote controls, and 24-volt and 14-pin receptacles and
115-volt feeders. supplying 24 VAC.
Spool Gun Extension Hose and Cable Kits
132228 25 ft. (7.6 m)
132229 50 ft. (15 m)
For Spoolmate 200, Spoolmatic and Spoolmatic Pro.
Extends leads, etc. between spool gun and power source.
Wire Straightener
141580 For .035–.045 inch
(0.9–1.1 mm) wire
141581 For 1/16–1/8 inch
(1.6–3.2 mm) wire
For 20 Series and 74 MPa Plus.

REGISTER YOUR

NEW EQUIPMENT

IT’S QUICK AND EASY

Registering your new Miller ® equipment may help
in the event we need to contact you regarding
changes or upgrades, or with any future
insurance claims. All Miller ® equipment
should be registered so we can provide
you with the highest level of service.

Register now at
MillerWelds.com/register

130