Page 9 - millerwelds catalog_2022

A FLE24 Cat P 09 MIG.qxp_MIG 1/11/24 5:22 PM Page 1

ALUMINUM GMAW MIG

®
AlumaFeed Synergic Aluminum Welding Systems Heavy industrial AlumaPower 450
is 3-phase only.
See literature DC/34.0
Processes
Dedicated aluminum system for the most advanced MIG and synergic pulsed MIG performance. Aluminum MIG (GMAW)
Aluminum pulsed MIG (GMAW-P)
AlumaPower 350 model allows Most popular accessories
™
for any input voltage hookup XR Push-Pull Guns (pg 30)
™
(208–575 V, single- or three-phase) with no manual linking, MIGRunner ™ Cart 195445 (pg 123)
Coolmate ™ 3 043007 (pg 123)
providing convenience in any job setting. Ideal solution for
Coolant 043810 (pg 123)
dirty or unreliable power. 450 model is 230/460 V manual
Industrial MIG 4/0 Kits (pg 125)
link or 575 V, three-phase only.
300405 With Dinse connectors
Impact-resistant and flame-retardant suitcase-style feeder. (350 MPa only)
300390 With lug connectors
Synchronized, true push-pull wire feed system for precise
(450 MPa only)
wire feeding and arc performance.
Consists of flowmeter regulator with
Profile Pulse provides TIG 10 ft. (3 m) gas hose, 10 ft. (3 m)
™
appearance with MIG simplicity 4/0 feeder weld cable, and 15 ft.
and productivity. Achieve (4.6 m) work cable with 600-amp
“stacked dimes” without gun C-clamp
Extension Cables (pg 130)
manipulation. Profile Pulse frequency can be changed to 247831025 25 ft. (7.6 m)
increase or decrease the spacing between the ripple pattern 247831050 50 ft. (15 m)
to achieve the desired weld appearance. 247831080 80 ft. (24.4 m)
1/16-Inch (1.6 mm) Liner and
Synergic pulsed MIG. As wire speed increases/decreases, Wire Kit for Gun 230708
pulse parameters also increase/decrease to match the
1/16-Inch (1.6 mm) Drive Roll Kit for
right amount of power needed, reducing the need to make
AlumaPower ™ 350 MPa and XR-AlumaFeed® SuitCase® Control Box 195591
with XR-Aluma-Pro gun air-cooled package shown. additional adjustments. For gun and feeder remote options,
Built-in MIG and pulsed MIG programs automatically see literature DC/34.0 or visit
MillerWelds.com
set the optimal parameters for a wide variety of wires,
Visit MillerWelds.com or your distributor
making it easy to set up and use. for other Miller®options and accessories.
Parameter and system locks enhance quality assurance
and protect weld consistency.
Trigger schedule select allows operator to change between
two sets of weld parameters.
Models/Packages
*Additional packages are
available — visit MillerWelds.com
or your distributor.

Power Source Only XR-AlumaFeed XR-Aluma-Pro ™ XR ™ -Pistol-Pro Coolmate ™
Stock Number Package Stock Number* SuitCase Feeder Push-Pull MIG Gun Push-Pull MIG Gun Industrial MIG 4/0 Kit with Coolant Cart
AlumaPower 350 MPa 951834 w/350 model (907420) 301567 25 ft. air-cooled — — — —
907420 208–575 V 951836 w/350 model (907420) 301567 — 25 ft. air-cooled — — —
907420001 208–575 V w/auxiliary power
951833 w/350 model (907420) 301567 25 ft. air-cooled — With Dinse connectors — MIGRunner cart
AlumaPower 450 MPa 951840 w/450 model (907483) 301567 25 ft. air-cooled — With lug connectors — MIGRunner cart
907483 230/460 V w/auxiliary power
907484 575 V w/auxiliary power 951839 w/450 model (907483) 301567 25 ft. water-cooled — With lug connectors Coolmate 3 MIGRunner cart
Note: All packages listed include gun drive rolls, feeder drive rolls and consumables for .035- and 3/64-inch (0.9 and 1.2 mm) wire.
All systems come set up out of the box to run 3/64-inch wire. 1/16-inch consumables not included — order separately above.
Amp/Volt Amps Input at Rated Load Output, 60 Hz Max. Open- Net
Model Input Power Ranges Rated Output 208 V 230 V 400 V 460 V 575 V KVA KW Circuit Voltage Dimensions Weight
AlumaPower 350 MPa 3-phase 5–425 A 350 A at 34 VDC, 40.4 36.1 20.6 17.8 14.1 14.2 13.6 75 VDC H: 17 in. (432 mm) 80 lb.
10–38 V 60% duty cycle W: 12.5 in. (318 mm) (36.3 kg)
D: 24 in. (610 mm)
1-phase 5–425 A 300 A at 32 VDC, 60.8 54.6 29.7 24.5 19.9 11.7 11.2
10–38 V 60% duty cycle
AlumaPower 450 MPa 3-phase 15–600 A 450 A at 36.5 VDC, — 49.4 — 27.2 23.6 21.6 18.3 90 VDC H: 17.25 in. (438 mm) 122 lb.
10–38 V 100% duty cycle (23.5 on W: 14.5 in. (368 mm) (55.3 kg)
575 V) D: 27.125 in. (689 mm)
XR-AlumaFeed SuitCase Input Power Input Welding Circuit Rating Wire Feed Speed Wire Diameter Capacity Maximum Spool Size Capacity Dimensions Net Weight
Feeder
24 VAC, 400 A at 100% duty cycle 50–900 ipm .035–1/16 in. (0.9–1.6 mm) 12 in. (305 mm) H: 15.5 in. (394 mm) 31 lb.
14-pin compliant, but
5 A, System duty cycle is limited (1.3–23 m/min.) Requires gun wire kit (230708) and control box drive W: 9 in. (229 mm) (14.1 kg)
only operates synergically
50/60 Hz to gun rating roll kit (268850) to run 1/16 in. (1.6 mm) wire D: 21 in. (533 mm)
w/MPa power sources
9