Page 39 - millerwelds catalog_2022

A FLE24 Cat P 39 Tregaskiss.qxp_Automation Reamers 1/11/24 5:31 PM Page 1

TREGASKISS ®

®
Tregaskiss TOUGH GUN TT4 Reamers Industrial
®
Most popular accessories
See Tregaskiss literature SP-TT4 Wire Cutter
Nozzle Detect
TOUGH GUN TT4 reamer robotic nozzle cleaning stations power through the toughest spatter TOUGH GUN® Reamer Stand
for increased uptime and weld quality. Automating spatter removal helps to extend the - Quick installation, easy on the budget
life of your robotic MIG guns and consumables. You’ll spend less time maintaining and
troubleshooting your robotic welding equipment and more time getting product out the door.

Two models available
TOUGH GUN TT4A (analog) reamer
®
Anti-Spatter Liquid
TOUGH GUN TT4E (Ethernet) reamer TOUGH GARD® Anti-Spatter Liquid
- Ready-to-use, water-soluble and
Standard features non-toxic
Anti-spatter reservoir with tethered cap and removable - Creates a sacrificial surface that
filter increases fluid volume capacity reduces spatter adhesion
Fluid level indicator sends a signal to robot operator and - Prolongs the life of consumables
and minimizes downtime for
the PLC/robot when anti-spatter liquid is running low
nozzle cleaning
Dedicated motor lubricator maximizes performance and TOUGH GARD® Multi-Feed System
protects your investment by extending the life of the motor - Eliminates the need to frequently
Spray containment unit helps prevent air contamination, refill sprayer reservoirs
improving the air quality of the working environment and - Feed up to 10 TOUGH GUN®reamer
units from a single 5-gallon or
maintaining the cleanliness of the weld cell
55-gallon drum of TOUGH GARD®
TT4E Ethernet model is designed for durability, anti-spatter liquid
serviceability and repeatability. Provides greater control Visit Tregaskiss.com or your distributor for
other Tregaskissnozzle cleaning options
optimization, remote monitoring capability and faster
and accessories.
trouble shooting to facilitate increased productivity.
Two-year warranty on TOUGH GUN TT4 reamers, or
extend your warranty to three years with exclusive use of For more information visit
®
TOUGH GARD anti-spatter liquid. Tregaskiss.com/TT4Reamer

™
AccuLock R Consumables See Tregaskiss literature SP-ALR

Cutaway of AccuLock R slip-on
diffuser and contact tip shown
Accu L ck TM QUICK LOAD liners
®
See Tregaskiss literature SP-QLL
AccuLock contact tips are 60% buried within the diffuser for less exposure to the heat of For ease of maintenance, QUICK LOAD liners
the weld, providing longer tip life and reducing frequency of tip replacement. Upgrading from install from the front of the MIG gun in less than
copper tips to AccuLock HDP contact tips can increase life up to 10 times, depending on half the time required to install conventional liners.
the application. Two-piece system with retainer installed inside
AccuLock contact tips concentrically align with the diffuser to eliminate cross-threading the power pin on first use
Mating tapers on both tip-to-diffuser and diffuser-to-neck connections provide good No need to cut and waste wire!
electrical conductivity — the contact tip and diffuser can be replaced with no impact to Avoid climbing over robotic tooling or transfer
Tool Center Point (TCP) systems to remove the torch from the wire feeder
Use AccuLock R consumables on Tregaskiss robotic and fixed automatic guns (see page 38) Change the liner from a safe zone in the robotic
to simplify inventory and reduce replacement errors work cell
Compatible with most Tregaskiss robotic and
fixed automatic guns (see page 38)

39